We do also carry Hydraulic Sliding Sleeve (HSSD) allowing to selectively control injection/production in horizontal and vertical well with liners as small as 4-1/2″ (114.3 mm) with no interventions.
Locking Mandrel & Landing Nipple
We are selling OTIS or BAKER STYLE Locking & Landing Nipples.
Models available:
R/RN LOCK & NIPPLE
R Lock is a selective lock that can be installed in R Landing Nipples. It is used in heavier weight tubing due to higher well pressure. It allows to hold pressure from either above or below and its Keys engage a profile in the R Landing Nipple. Standar Material is 9 Chrome or other materials upon request.
S Lock
S lock is used into the polished seal bore of the S Landing Nipple. It can withstand pressure from above and below. It can be used with pump thru plugs, positive plugs, standing valves, and safety valves. The standard Material is SS.
W Lock
W Lock is used in wells that are not equipped with Landing Nipples during completion. They are attached to the wall of the tubing and during the running procedure, its Element is expanded to seal against the tubing wall. It can only hold a differential pressure from below.
X/XN Lock & Nipples It is used in standard weight tubing. This lock uses Keys to engage a profile in the Landing Nipple and an integrated Packing Mandrel that allows it to hold pressure from either above or below. This lock can be used in conjunction with pump thru plugs, positive plugs, safety valves, and standing valves.
Plugs
Models Available
C Plug
C Plug is an equalizing assembly that is used in conjunction with various subsurface controls such as Locks and tubing mandrels. The C Equalizing Plug holds pressure from below only and can be used as a pump thru plug.
D Plug
D Plug is an equalizing assembly that is used in conjunction with various subsurface controls such as Locks and Tubing Mandrels. The D Plug holds pressure from below only and can be used as a pump thru plug.
Dual-Flapper Pump THRU PLUG
Dual-Flapper Pump Thru Plug is used to prevent pressure from pushing up through the assembly.
PN PLUG
PN Plug is an equalizing assembly used in conjunction with S Locks to hold pressure from above and below. When the Prong is pulled, pressure is equalized.
PR PLUG
PR Plug is a positive plug used with R Locks. The PR Plug holds pressure from above and below. When the Prong is pulled, pressure is equalized.
PX PLUG
PX Plug is a positive plug used with a X Lock. It can be used to test tubing or plug tubing for repairs or replacements. Pulling the Prong from the assembly achieves equalization.
R Plug
R Plug is a positive plug used in conjunction with the R Lock to hold pressure from above and below. This plug can be used to test tubing or to plug tubing while doing repairs to surface equipment.
X Plug
X Plug is a positive plug used in conjunction with the X Lock to hold pressure from above and below. This plug can be used to test tubing or to plug tubing while doing repairs to surface equipment.
Pack-Off Equipment
We are selling these following DOWNHOLE PACK-OFF EQUIPMENT:
A Tubing Stop
A Tubing Stop is designed for use in integral joint tubing strings where a coupling recess is not available. It is used primarily as an anchoring device in packoff applications.
It needs JD Pulling Tool to both run & Pull the A Tubing Stops.
A-1 Tubing Stop
A-1 Tubing Stop is similar to the A Tubing Stop, except the A-1 Tubing Stop has an internal fishneck. It needs GS Pulling Tool to both run & Pull the A-1 Tubing Stops.
AD2 Tubing Stop
AD2 Tubing Stop is a spring loaded tubing stop designed for use in integral joint tubing strings where a coupling recess is not available. It is used primarily as an anchoring device in packoff applications.
It needs JD Pulling Tool to both run & Pull the A Tubing Stops.
F Collar Stop
F Collar Stop locates in the recess of A.P.I. upset and non-upset tubing. The stop is lowered to the required depth, and then lifted upward. This motion will trip the latch springs, and the arms will then engage the collar recess. Jarring downward locks the arms into place.
It needs F Collar Stop Running Tool to set F Collar Stop.
G PACK-OFF
G Packoff is used to seal off holes in the tubing. The G Stop Anchor can be used to keep the G Packoff in the locked position. The G Packoff can be used as a plug during well completion where Landing Nipples were not installed.
Shifting Tools
We do carry model B & BO Shifting Tool to selectively locate & shift most SSD.
The B Shifting Tool is designed to release only after the sleeve reaches its fully open or closed position
The BO Shifting Tool is designed to locate and shift sliding side doors to the down position
Prongs
We do carry several types of prongs that can be combine with lock mandrel & plug.
Type of Prongs:
DK Running & Pulling Prong
P Prong
R/X Running
Pulling Prong
Kickover Tool
We have many types of Kickover Tool for your Gas Lift / Side Pocket Mandrel operation:
“K”
“L”
“L2D”
MERLA HDTMP
MERLA HDTP
OK-1
OK-5
OK-6
OM-1
OM-5
P Kickover Tool
Wireline Surface Equipment
We are supplying wireline surface equipment such as: